Help & Advice Videos

 
 
 

From the very moment you get in to contact with us we aim to take make sure your new boiler installation is stress and hassle free. So, whether it be a new boiler installation or an emergency repair we are here to help you every step of the way.

At Swale Heating we install only the best boilers from the UK’s most highly regarded heating manufacturers. One of the most popular boiler brands we install are Worcester’s comprehensive boiler range. Worcester are market leaders within the heating industry and produce an extensive range of combi, regular and system boilers that run on a variety of fuel sources. Below are a range of videos to help you find out more information about looking after your heating system.

 
 

Types of Boilers

When it comes to boilers it can be tricky working out which type is best for your home or property. Worcester's video helps to explain the main types of boilers available for installation and what each type is best suited to.

Get a free boiler estimate

Or call our sales team on 0800 731 33 44

 


 

Combination Boilers Explained

Combination boilers are one of the UK’s most popular boiler choices, they are perfect for those with a high-water flowrate and require instant hot water on demand. View Worcester's video to find out more about combi boilers.

 

 

 

 

 


  

Regular Boilers Explained

Regular boilers are the oldest type of boilers around and are often used when replacing a boiler in an older property. View Worcester’s video to find out more about regular boilers and which properties they are best suited for.

 

 

 

 

 


 

 

System Boilers Explained

Unlike combination boilers, a system boiler requires a cylinder for storing hot water. Despite the need for a hot water cylinder, they are considered a space saving option when it comes to heating your home. View Worcester’s video to find out more about system boilers and in which situations they should be used.

 

 

 


 
 
 

 
 
 
 
 
 

Boiler Maintenance

Change the Pressure of your Heating System

Once your heating system has fully cooled down, the pressure of your heating system should always be between 1 and 1.5 bar on the pressure gauge.

A reading outside of these figures may mean your heating system needs to be amended, watch the video to find out more about how you can change the pressure your heating system.

 


 

 

 

 

Repressurise your Worcester boiler

Watch our useful video on how to repressurise your Worcester boiler. This video is specific to a Worcester boiler enabling you to follow the step by step instructions to hopefully making your boiler work to its full capacity.

 

 


 

 

How to Bleed a Radiator

If your radiators aren’t warming your home as well as they used to, and your radiators have cold spots at the top, it may be time to bleed your radiators.

Bleeding your radiators is a quick and easy solution for removing trapped air bubbles from your radiators. Watch Worcester’s handy video to learn how your can quickly bleed your radiators.

 

 


 

 

 

 

Resetting your Worcester CDI Boiler

If your Worcester CDI Boiler keeps locking out, you will find that you are unable to maximise your boilers heating potential and will be using energy that is not contributing towards your homes heating. Watch our video how to reset your Worcester CDI boiler to try and maximise your heating output.

 

 


 

 

 

 

Resetting your Worcester RI Boiler

If your Worcester RI Boiler keeps locking out, you will find that you are unable to maximise your boilers heating potential and will be using energy that is not contributing towards your homes heating. Watch our video how to reset your Worcester RI boiler to try and maximise your heating output.

 

 


 

 

 

Resetting your Vaillant Boiler

If your Vaillant Boiler keeps locking out, you will find that you are unable to maximise your boilers heating potential and will be using energy that is not contributing towards your homes heating. Watch our video how to reset your Worcester Vaillant Boiler to try and maximise your heating output.

 


 

 

 

Clear Your 3-Port Valve

If you are finding that your heating is not working but your hot water is, it could be due to build up of muck in your valve over time. Try this simple 3-port valve trick to try and clear your valve which could prevent an engineer call-out.

 

 


 
 
 
 
 
 
 
 
 
 
 
 
 

Boiler Controls

Boiler controls can help you get the most from your heating system, allowing you to heat your home more efficiently whilst also giving you full control. View Worcester’s video to find out more about the types of heating controls and how they should be used in your home.

Get a free quotation today

Or call our sales team on 0800 731 33 44

 


 

Wireless Controller not Working, or Replacing Batteries

Worcester’s MT10RF Mechanical RF Thermostat allows you to program daily times for your central heating system as well as set up separate room temperatures for day and night. The start and finish time is set using the 'teeth' on the dial.

Watch Worcester’s video to find out how to set up your MT10RF Mechanical RF Thermostat, replace the batteries and find out some of the most common reasons your thermostat may stop working.

 


 

Danfoss Programmer Controls

Learn how to fully operate your Danfoss heating programmer and how to get the most out of it.

Programmers allow you to set ‘On’ and ‘Off ’ time periods. Some models switch the central heating and domestic hot water on and off at the same time, while others allow the domestic hot water and heating to come on and go off at different times.

Using heating controllers is not always an easy task, but programming them properly can help you keep warm at home and save money on your energy bills.

 


 

Changing the batteries in your smart thermostat

When it comes to heating your home, there has been a great deal of advancement in technology within the sector, and with programmers and thermostats in particular. We realise that some of you may not take to, or adapt to these innovations as easy and other people simply have some questions on how to get the most out of your thermostat or programmer.

 


 

Reset your Programmer

Learn how to reset your Danfoss programmer. The simple steps in this video will help you to get your thermostat back up and running.

The user has maximum control and flexibility over their central heating temperature with a Danfoss programmer, as you can stipulate whether when you want to set the central heating to come on over the course of the day or week.

 

















 
 
 
 
 







 
 

Worcester Boiler Range

 

Greenstar CDi Classic - Combi Boiler

The Greenstar CDi Classic is one of Worcester's most popular combination boilers, offering high volumes of hot water with excellent efficiency. With many advantages including flexible wall mounting installation and a low energy pump for reduced electrical usage, it is clear to see why the Greenstar CDi Classic is such a popular choice.

 

 


 

 

 

Greenstar i Classic - Combi Boiler

The award-winning Worcester Greenstar i Classic Combi Boiler is installed in over 1 million homes across the UK. The model has been designed with simplicity in mind featuring simple controls and a clear information display.

 

 

 

 


 

 

Greenstar CDi Compact - Combi Boiler

The Worcester Greenstar CDi Compact is the smallest of the Greenstar range and has been designed for installations with a limited amount of space. Its compact design offers flexible installation and can even be installed within a standard kitchen cupboard. Like other Greenstar models the Greenstar CDi Compact offers a user-friendly interface and ensures instant hot water is always available.

Get a free quotation today

Or call our sales team on 0800 731 33 44


 
 
 
 
 
 

 

 

 

 

Bing Digital