Top tips on how and when to bleed your radiator.
Bubbles in your central heating system can stop hot water from successfully circulating around your home, preventing radiators from reaching their potential heat and making the entire heating process slower. Trapped air can also cause loud and irritating noises, which may seem more serious, to come from your heating system. Bleeding the radiators within your home can prevent these issues and there are several tips to make the procedure simple and quick.
How often should you bleed your radiator?
It is advised that you should bleed your radiator at least once each year, most commonly at the beginning of the winter months enabling your system to work to the best of its capacity and reduce future energy costs, so if you have a new radiator, it’s very unlikely that you would need to bleed it.
How will I know if my radiators require bleeding?
Turn on your heating and wait for your radiators to reach their full heat. Then, you should inspect each radiator in your home to detect if any cool spots appear. Ensure you do not burn yourself by holding your hand at a safe distance from the heat or wearing gloves. Cool spots are more than often at the top of the radiator as the air is attempting to escape. Cold spots on radiators may also indicate other problems.
What else should I check?
Ensure that the thermostatic radiator valve (TRV) is on completely and is not obstructed or covered. These are commonly found at the base or top of your radiator. Also ensure that there is no rust on your radiators or potential leaks, suggesting a larger issue than trapped air.
What do I need to do before I bleed my radiators?
Firstly, turn off your heating! Radiators must be cool enough to touch. Once you have located what radiators require bleeding by sourcing cold spots, you will need to find a radiator key; radiator keys are relatively small and can be sourced from many DIY stores. Some newer radiators can be bled with a screwdriver. To bleed your radiator, you will also need a cloth and a tray or pot to collect the released water.
What is the bleeding process?
Hold your tray or pot below the valve to collect the water and insert the radiator key into the grooves of the valve. Using a cloth to protect your hands, twist the key (often anti-clockwise) and after a hissing noise signifying the release of air, water should run. Once water begins to drip out of the valve and the sound of air releasing has stopped, shut off the valve by turning the key in the opposite direction. Ensure that no water has covered the radiator as this could cause rust. Continue to the next radiator and repeat the process.
What do I need to do after I bleed my radiators?
Now you have bled your radiators, switch on your central heating and ensure that your boiler is signifying the correct boiler pressure. If the pressure is too low after bleeding, you will need to boost the pressure using the filling loop and instructions from the manufacturer of the boiler itself. Check that none of the bleed valves are leaking.
How do I know if it has worked?
Recheck that all your radiators are evenly emitting heat. If you do still hear noises, it could be the cooling and condensing of the system water, which is perfectly normal. If you still have cold spots on your radiators, you may have a build-up of sludge, which it is vital to get removed and treated.
The issue has not been resolved, should I bleed my radiator again?
Occasionally, some radiators may not have correctly bled the first time and could benefit from a second bleeding, however if the issue remains after this, it is important to contact a Swale Heating engineer too conduct a radiator repair efficiently.
There are, unfortunately, some occasions where a repair cannot be made, and this would be the time to replace old radiators, but be sure our engineers would be able to conduct a radiator installation and bring warmth back into your home.
Here at Swale Heating, we are here to offer advice and help concerning all heat related issues. If you struggle with this process or simply would benefit from more information, please call 01795 477098.